Posts Tagged ‘harp’

CNC Steampunk Harp – The Sector67 Field Trip – Part 2

 

Finished Sound Board

Finished Sound Board

[See Part 1]

The sound board of the harp had always been the wild card. Elizabeth and I began the project last year knowing that we’d want to use a laser cutter to etch it with some kind of Victorianesque steampunk design involving gears. And we knew that PS:One’s Epilog, with its 24″ x 12″ bed and no feedthrough capability, simply couldn’t fit a 49″ sound board. While design focused on the brass panels, as we did have access to a CNC router, the sound board was left for later, especially because we didn’t know if we could find a smaller laser cutter with feedthrough, meaning we needed a design that could be etched in pieces, or a large laser cutter that could engrave the entire sound board at once.

Elizabeth and I were planning a trip to Madison, WI, and we heard rumors that Sector67 had a colossal Chinese import laser cutter. I reached out to them asking if they would be willing to help with this project, and Chris Meyer, director of Sector 67, responded, inviting us to their space. Knowing what we had to work with, Elizabeth was able to create the design in Adobe Illustrator. Read the rest of this entry →

01

02 2014

CNC Steampunk Harp – Part 1

 

Side view of harp with pockets routed

Side view of harp with pockets routed

For the past year, Elizabeth and I have been collaborating on a project using the amazingly cool CNC tools at Pumping Station: One. The goal: to build a harp. Not just any harp, mind you. A steampunk harp! The idea was to start with a kit (the Voyageur harp from Music Makers, 33 strings, cherry) but heavily customize it as follows:

  •  CNC cut brass panel inserts, inlaid in pockets routed in the sides of the harp
  • The brass panels would be etched using a galvanic etching process, similar to the one used by the Steampunk Workshop to create their clockwork guitar. Elizabeth would design the shape and custom artwork (gears, of course!) for this.
  • The sound board would be laser engraved with some type of steampunk design. The design is in progress, and we are searching for a laser engraver large enough to handle the sound board.
  • Although not strictly steampunk, I’d considered adding RGB addressable LED lighting under the neck of the harp, which could illuminate the strings, as well as respond to the pitch of the strings being played.
CNC routing brass

CNC routing brass

First, we had to start by routing the brass, using PS:One’s CNC 3020 router. Elizabeth drew the design, including the brass outline and the pattern we will use when we etch the brass. We did this last spring at PS:One, and we ran into massive problems with the brass vibrating and breaking end mills. The project remained dormant for many months until a breakthrough: What if we glued the brass to a scrap board? That would at least keep it immobile so it couldn’t chatter and bind on the end mill. The good news: This worked! Success! The bad news…. The Go To Home button on Mach3 does not, by default, raise the spindle before moving it. And a clamp was in the way. The result: A badly bent spindle. Well, all was not lost….
Read the rest of this entry →

23

01 2014