Posts Tagged ‘shapeoko’

ShapeOko Building Adventures So Far

Inventables donated a ShapeOko 2 CNC Router “The Works” kit to Pumping Station:One, and we’ve been doing a group build over four sessions so far. It’s been a chance for people to learn about open hardware and CNC firsthand from the ground up, and participate in making PS:One’s next machine. We’ve had participants with various levels of experience working together, and I think everyone learned something new.

During the first session, we assembled wheels and bearings, and attached them to plates for the x, y,and z axes. We started the next session with parts that looked like this:

shapeoko2-6

The instructions describe the z-axis assembly as the most intricate, and they’re not kidding. It took a lot of fiddly work and some mistakes to get here:

shapeoko2-7Here are some of the participants, planning what to do next:

shapeoko2-2We assembled the carriages, then the gantry and machine frame. The machine came together well during this session:

shapeoko2-8I think #1177 (“Minion”) the ShapeOko1 is jealous of its newer, larger, and shiner sibling #5549 (so far unnicknamed):

shapeoko2-1During the third session, we squared and wired the ShapeOko and installed the drag chain (“e-chain”) with some help from Zach from Inventables.

shapeoko2-5During the fourth session, we nearly finished the wiring and made a custom holder for the emergency stop button:

shapeoko2-4Thank you to everyone who helped so far! Our next build session will be Thursday, August 28th at 7pm in PS:One’s shop. We’ll be testing the motors, troubleshooting, and sending the “hello world” job. Come see the machine move!

Thank you Ron (I think) for the Session 2 photos and Allen for the Session 3 photo.

25

08 2014

Group ShapeOko Build, Part Two!

The adventure continues! We had a great turn out at the last ShapeOko build event. Now it’s time to assemble the gantries and do some wiring. Join us this Wednesday July 30 from 7-10PM in PS:One’s shop to see the machine really take shape, and maybe we’ll get to see it move, too. Learn about open hardware and the ShapeOko 3D carving machine. This event is open to the public and is great for newbies and experienced CNC’ers, too.

Inventables-Shapeoko2-2

28

07 2014

CNC Build Club: Shapeoko 2 Demo

Shapeoko

 

At the next CNC Build Club, on Thursday 10/24/2013 at 7:00pm, we are going to have a demo of the, soon to be released, Shapeoko 2 CNC router.  The ShapeOko was designed by local inventor, and PS:One friend, Edward Ford.  The original version was extremely popular.  The new version adds many new features.

  • Larger work area.
  • Easier to expand
  • Open front and rear for feeding stock through
  • Dual motor Y axis is now standard
  • More ridged
  • Belts lay flat and are easier to install

Shapeoko

 

It will go on sale at Inventables very soon.  Inventables will also be giving away one milling bit starter kit at the meeting.  This a a kit of 5 solid carbide 1/8″ diameter bits.  It includes 2 spiral upcut bits, 2 straight flute bits and 1 ball end mill.  You must be registered on Meetup for this meeting and present to  be eligible for the bit kit.  The meeting is open to members and non-members.

Shapeoko

18

10 2013

ShapeOko!

For the past few months, my CNC Build Club project has been building a <a href=”http://www.shapeoko.com/”>ShapeOko CNC mill</a> from a kit Jeff donated to PS:One to replace the machine hacked into a pick-and-place. The ShapeOko belongs to PS:One and will (hopefully) be a permanent part of the space.

On July 21st, I moved the machine to its home in the shop, finished wiring it up, and tested the motion of the stepper motors. It moved like it was supposed to on the x, y, and z axes, so I moved on to drawing the Hello World job (the ShapeOko logo) in the air. That worked perfectly, too. So now it was the moment of truth – time to find a drawing implement, tape it to the gantry, and send the GCode to draw the logo on paper.

After several attempts at finding the right pen or marker, and figuring out how to tape it securely, this was the result:

helloworldsmall1 helloworldsmall2

A very happy me, and a successful Hello World.

I started this project to learn more about CNC projects from the ground up. Along the way, I learned a bit about tapping, soldering, and Arduinos too. Here’s a look back at it:

This was the beginning:

shapeoko1small   Then I tapped more Makerslide and added the frame and rails:

shapeoko2small

Then I added the Z-axis:

shapeoko3small

Edward Ford, the Shapeoko’s inventor, happened to be at the space the night I finished the mechanical build of the Shapeoko:

shapeoko4small

After tweaking and tightening up the mechanical build, I assembled all the electronics I would need, mostly from donations to the project. (Thank you!)  Edward came back for ShapeOko night as part of CNC Build Club, and we got the machine wired up. Unfortunately, the x-axis didn’t move properly, probably because the GRBLshield controller got damaged during rework. So Bart donated another GRBLshield, and Ryan did some heroic rework on its connectors, and this one worked!

Colin donated a Dewalt spindle to the project, and the next step is to get some end mills, test the machine’s milling, and certify some people. I’m also looking at installing some limit switches on the machine. Of course, there are also options like a different spindle, a dual-driven y-axis, or a more robust z-axis. Those will be things for the CNC Build Club and other interested members to decide on.

I got this far with more than “a little help from my friends”. Thank you to the people who offered help, parts, or advice (in no particular order): Jeff, Jay, Steve, Colin, Ryan, Edward, Cat, Bart, Jeremy, Fernando, Jesse, and Everett. If I accidentally left you out, I’m sorry!

04

08 2013

CNC Build Club – ShapeOko Night

shapeoko

This Thursday at 7:00pm  Edward Ford will be hosting a ShapeOko night.  Edward can help you build, complete, setup and use the ShapeOko router.

He will also give a quick overview of the web based MakerCAM program.  MakerCAM can be used to create toolpaths for CNC routers.  Edward and Inventables are working to develop this program into a full featured CAM program.

MakerCAM

For those without ShapeOkos, we can talk about your CNC project or work with some of the digital fabrication equipment at PS:One like the laser cutter, CNC router or 3D printers.

Please RSVP via Meetup.com.

 

 

 

19

05 2013

Automation Night (was: DIY CNC Night) Wednesday 4/11 at 7pm

The second Wednesday of the month is coming up which means that our monthly Automation Night (was DIY CNC night)  is upon us again!

Are you interested in at-home automated manufacturing? Do you like the idea of owning your own 3D printer, laser cutter, automated mill, router table, or other astounding automatons? Then this is the night for you!

Automation Night is an ever-growing group of enthusiastic amateurs and professionals in the field of do it yourself automated manufacturing (ie 3D printers, CNC mills, laser cutters, cake frosters, etc) hardware and software.

Please come if you’re interested in learning more, already have an automated tool at home, want to show off your latest build, or just want to meet locals who are into this exciting technology!

  • Who: Open to the public
  • Where: Pumping Station: One, 3354 N Elston Ave, Chicago, IL
  • When: Wednesday, April 11th, 7pm
  • Cost: Free ($5 suggested donation for non-members to help us pay the rent)

Planned Schedule:

  • 7-7:10: people show up
  • 7:10-7:25: introductions round-robin
  • 7:25-’till everyone leaves: schmoozing, machine assembly and show off, discussion of tools and techniques

Image: 120 Cell by Thingiverse user George Hart

04

04 2012

DIY CNC Night: 3/14 7pm


March’s DIY CNC night is upon us!

Are you interested in at-home automated manufacturing? Do you like the idea of owning your own 3D printer, laser cutter, automated mill, router table, or other astounding automatons? Then this is the night for you!

This month’s DIY CNC night will feature a live build of PS:One’s new and shiny MakerSlide ShapeOko.  Bart and Edward (of MakerSlide and ShapeOko, respectively) will be helping Jordan and Patrick (PS:One’s electronics area host and Vice President, respectively) take delivery of and assemble a MakerSlide ShapeOko.

DIY CNC night is an ever-growing group of enthusiastic amateurs and professionals in the field of do it yourself automated manufacturing (ie 3D printers, CNC mills, laser cutters, cake frosters, etc) hardware and software.

Please come if you’re interested in learning more, already have a CNC tool at home, want to show off your latest build, or just want to meet locals who are into this exciting technology!

  • Who: Open to the public
  • Where: Pumping Station: One, 3354 N Elston Ave, Chicago, IL
  • When: Wednesday, March 14th, 7pm
  • Cost: Free ($5 suggested donation for non-members to help us pay the rent)

Planned Schedule:

  • 7-7:10: people show up
  • 7:10-7:25: introductions round-robin
  • 7:25-’till it’s done: Assembling a Makerslide ShapeOko CNC mill with Edward and Bart
  • 7:25-’till everyone leaves: schmoozing, machine assembly and show off, discussion of tools and techniques

07

03 2012