All posts by jesseseay

Solder Party this Saturday

WEB-Chip

This Saturday I’m celebrating my birthday with a solder party in the PS1 Electronics Lab. Everyone is invited to join me in building a large electronic art work for my upcoming gallery show No-Fi, at Chicago Artists Coalition.

There’ll be pizza, cake, drinks, and lots of knitted circuit boards. Come any time and stay as long as you like. We’ll be there til we run out of things to solder and/or food. Please RSVP on Meet Up so we can plan ahead.

Share this!

Intro to Arduino Workshop

WEB-Chip

Women’s Electronics Workshop: Intro to Arduino is scheduled for Sunday August 24, 2-5pm. Register on the Meet Up page. Here’s the blurb:

Learn to program Arduino using the ATtiny85, a $2 chip that’s perfect for simple projects. You’ll receive your own Tiny Programmer ($20) which uploads your code to the chip, and your first ATtiny85.

We’ll cover basic Arduino syntax, controlling LEDs, and using a photocell as a sensor. You’ll also learn about the best online resources for teaching yourself more Arduino.

***The ATtiny85 is the same chip that powers boards like the Trinket and the Gemma. To learn more about making your own wearable Arduino with the ATtiny85, check out this instructable (pictured above).***

Cost:

Workshop fee: $30

Materials fee: $30
Requirements:

-BYOB: Bring your own breadboard. If you did the circuit building workshop, you should have one already. Please bring it with you.

-laptop with Arduino and ATtiny Support installed and USB port

This workshop is for participants who identify as female or genderqueer.

♦♦♦♦♦

Jesse Seay About the instructor: Jesse Seay is a professor at Columbia College Chicago, where she teaches electronic art in the Audio Arts & Acoustics Dept. She has an MFA from SAIC and an MA in Communication Studies from UNC Chapel Hill. Find her work online at www.jesseseay.com and blog.jesseseay.com.

 

Share this!

Women’s Electronics Workshop: Circuit Building on August 3

 

ADSC_4544-Lab-pan-HI

Sunday, August 3, 1-5pm

Take a circuit from diagram to breadboard to finished project.

– Learn to Solder

– Read circuit diagrams

– Breadboard a circuit

– Design an LED circuit and solder it to perfboard.

Time: 4 hours
Price: $40
Materials fee: $10
Pre-reqs: none

This workshop is for participants who identify as female or genderqueer. Open to both members and non-members of Pumping Station: One.

Taught by Jesse Seay of Columbia College

Register for the workshop at the Women’s Electronics Workshop Meet Up Page.

Share this!

Women’s Electronics Workshops: June 21 and 28

 

WEB-Chip

Pumping Station: One has partnered with Chicago Women Developers to offer two introductory electronics classes Saturdays June 21 & June 28, 10am to 2pm.

The workshops are $32 for PS1 members, $42 for non-members. Participants who attend both classes will receive a $10 rebate. Registration is available through the CWD meetup page. Or click on the name of each workshop below to go to the event Meetup page. In the upper right hand corner of the page, you can join and RSVP in order to register and pay through PayPal.

The workshops are separate — you can attend #2 without attending #1. (PS1 members will receive their discount as a rebate when they attend the workshop.)

Lunch will be provided for both workshops.

These workshops are for people who don’t identify as male; people who identify as female or queer are welcome.

♦♦♦♦♦

Workshop #1: Electronics Bootcamp

A hands-on introduction to the fundamentals of electronic circuits.

  • Make a battery
  • Draw a resistor
  • Introduction to:LEDs, Resistors, Capacitors, Transistors, Switches
  • Use multimeters to measure DC voltage, resistance, continuity
  • Build multiple circuits to demonstrate each component, using Snap Circuits

2014-04-18 12.49.36

Workshop #2:  Circuit Building

Take a circuit from diagram to breadboard to finished project.

  • Introduction to soldering tools
  • Learn to Solder
  • Reading circuit diagrams
  • Breadboarding a circuit
  • Design and solder a wearable circuit bracelet (with LEDs and battery)

If you’re interested in coming, but can’t for financial reasons please contact CWD to apply for a scholarship.

♦♦♦♦♦

Jesse Seay About the instructor: Jesse Seay is a professor at Columbia College Chicago, where she teaches electronic art in the Audio Arts & Acoustics Dept. She has an MFA from SAIC and an MA in Communication Studies from UNC Chapel Hill. Find her work online at www.jesseseay.com and blog.jesseseay.com.

Share this!

Knitting Machine Workshop

Threading the tension masts
Threading the tension masts
Carl, Nathan, and David
Carl, Nathan, and David
Tension Swatching
Tension Swatching
Sheila on the chunky machine
Sheila on the chunky machine
Two Brother knitting machines: the chunky 230, the standard 930
Two Brother knitting machines: the chunky 230, the standard 930

 

Patrick can't resist..
Patrick can’t resist.

 

Because why wouldn't you carry a knitting machine on a bicycle when it's 20 degrees outside?
Because why wouldn’t you carry a knitting machine on a bicycle when it’s 20 degrees outside?
Share this!

Giant Coil Sculpture at Hyde Park Art Center

 

Coil-in-Shop

You may have seen me (with amazing help from Madeleine Klichowski, Dan Locks, Matt Triano, and Pipefitter Dave) hard at work on some very curious looking objects (like a giant coil) in the shop and electronics lab. Well, finally, we’re done– it’s new kinetic sculpture and it’s now installed at the Hyde Park Art Center, for a group show opening Saturday, Aug 10, with a reception from 3-5pm.

2013-08-06 11.02.25 Red Ball Install

 

The show will also feature a 10 foot wide version of Red Rubber Bands (pictured below in smaller form). The new version looks AWESOME (and I’ll be sharing photos as soon as I get them).

RRB 1697 opp

Even more fun, Maker Camp interviewed me about the sculptures this week. (Also participating, circuit bender Patrick McCarthy.)

[youtube]https://www.youtube.com/watch?v=qnx-s8vtHSc[/youtube]

So, if you’re around Hyde Park tomorrow, please stop by the reception from 3-5pm. Or come check it out any time during normal gallery hours til September 21, when we’ll close the show with a public critique.

(If you’d like more info on my sculpture, check out my website.)

Cheers!

Jesse Seay

 

Share this!